Arkimede Nano Raised Floor System 4mm Joint Adjustable Support Head

Arkimede Nano Raised Floor System 4mm Joint Adjustable Support Head  by PSC

You do not have a price agreement for this item. Please call your sales representative.


PSC Arkimede Nano Raised Floor System 4mm 5/32" Joint Adjustable Support Head for tile stone slabs includes base, rotating nut, head and 9mm extension

This is one component in a system

One Arkimede Nano Raised Floor 4mm 5/32" Joint Adjustable Support Head Assembly

Raises tile-stone slab floor between 18mm ~3/4" to 36mm 1-3/8"

  • Includes base support, rotating adjustment nut and support head
  • Support head for appropriate tile or stone slabs with 4mm - 5/32" joint spacer
  • Can be easily expanded into standard Arkimede for more height
  • Easy and affordable to create an elevated hard surface area

This is a raised flooring system requiring multiple units dependent on the number of tile/slab sections to support.

If you are raising your floor more than 1-3/8" (36mm) you can switch to the standard Arkimede (same head)

Arkimede Nano column set includes a 9mm (0.354") extension piece that is not used for heights below 27mm (1.06")

Please see other accessories to create a complete installation system.


Make elevating hard surfaces a cinch without breaking the bank

  • Depending on the support head used, the PSC Arkimede Nano system can elevate hard surface material or wood decks.
  • The head for this listing is for tile/stone slabs with a 4mm (5/32") spacing.
  • The installation system can be permanent or temporary.
  • This system does not require adhesives or grout - moisture will escape through the created spacer lines.
  • This system assumes that there is already suitable established drainage (if needed) below elevated floor.
  • Adjustable - each support can be set to a different height to compensate for uneven substrate.
  • Head support assemblies, base units and optional extensions universally lock one piece to the next with a simple twist
  • Raised floors and decks can be elevated over virtually any stable surface.
  • Great for installing flat, traffic-friendly surfaces over sloped areas like a flat roof.

Raised hard surface flooring and decks are now in high demand. Other systems designed to tackle the installation have been either pricey, overly complicated or both. The PSC Arkimede Nano raised flooring system dramatically simplifies the task of elevating hard-surface stone or tile slabs from ~3/4" (18mm)to 36mm (1-3/8") and then switching to standard Arkimede up to 22" (560mm) above the supporting surface. The proper height can be easily achieved by using the appropriate combination of the adjustable support head in conjunction with three different sizes of extensions (photos below show a few of the numerous possibilities.) The substrate can be uneven and can be virtually any stable surface. Depending upon strength requirements of your flooring structure, additional support units can be situated between the joint supports. The PSC Arkimede raised flooring system makes it easy to create a perfectly level hard surface or deck at the height you want (between ~3/4" (18mm) and 22" (560mm) elevation.)


PSC_Arkimede_Anti-Noise_Rubber_Top_Shim_Caption.jpgPSC_Arkimede_Anti-Noise_Rubber_Bottom_Shim_Caption_2.jpgPSC_Arkimede_Install_Rendering.jpg Arkimede_Nano_Tech_Draw.jpg Arkimede_Nano_Tech_Draw2.jpg

Customer Reviews and Ratings

No reviews yet! Be the first to review this product.

Review This Product

Product Shipping Information

You will be able to estimate shipping amount to your specific destination for your entire cart during the checkout process.

General shipping Information
Copyright © 2019 PSC America